Service
New Construction Wiring
Full electrical packages for new homes, additions and commercial builds — from temp service and rough-in to trim-out and final inspection.
What this service includes
- Temporary construction power
- Service entrance and panel
- Complete rough-in wiring per plans
- Recessed and decorative lighting
- Smoke and CO detector wiring
- Bath, kitchen and laundry circuits
- Exterior lighting and outlets
- Final trim-out, testing and inspection
Who it's for
- Custom home builders and GCs
- Homeowners building or adding on
- Light commercial new builds
- Modular and stick-built projects
Why it matters
New construction is your one chance to wire the building right — generous circuits, smart layouts, future-ready capacity. The cost of fixing shortcuts later dwarfs the cost of doing it well now.
How it works
- 1. Plan review and electrical package quote.
- 2. Temp power, then rough-in coordinated with framing and HVAC.
- 3. Trim-out, devices, fixtures, panel labeling and inspection.
Wiring a home for the next 30 years
We wire new construction the way we'd wire our own — generous circuit counts in kitchens and baths, dedicated circuits for big appliances, conduit stubs for future EV chargers and solar, structured wiring for data, and an oversized panel so you're never out of breaker space the day after move-in.
Bath fans on timers, garage outlets at the right height, exterior receptacles on every elevation, outdoor switching for holiday lighting — the small choices made at rough-in are what separate a builder-grade house from one you actually love living in.
Working with your builder or GC
We're easy to work with on the jobsite: we hold our schedule, communicate with framers and HVAC, keep the panel area clean, and provide inspection-ready work without drama. Bring us in at the plan stage and we'll catch problems before they're framed in.
Common questions
When in the build should you start?
Bring us in at the plan stage if you can — we'll review prints, suggest circuit counts, and flag conflicts before framing. At minimum, we need to be on site right after rough plumbing.
Do you work with builders or only homeowners?
Both. We're a regular sub for several Valley builders and we also work directly with owner-builders and custom-home clients.
Available across the Susquehanna Valley
We offer this service throughout our full service area, including Watsontown, PA, Lewisburg, PA, Milton, PA, Danville, PA, Selinsgrove, PA, Williamsport, PA, Allenwood, PA, Sunbury, PA, Bloomsburg, PA.
The Clear Electric approach
More than a quote — a plan you can actually follow.
Most homeowners and business owners we meet have been burned before — a vague verbal price, a crew that disappears mid-job, or a "finished" install that fails inspection. Our new construction wiring process is built to be the opposite of that: everything in writing, every step explained, and a single electrician you can call from the first phone conversation through the final walkthrough.
Because we're a local Susquehanna Valley company, we're not routing you through a call center or subbing your job out to whoever is cheapest that week. The person who quotes your new construction wiring project is on site, accountable for the work, and lives in the same community. If something needs a follow-up in six months, we pick up the phone.
We take new construction wiring work seriously because electrical is one of the few trades where doing it "mostly right" isn't good enough. Loose neutrals, undersized conductors, missing bonding, or an ungrounded circuit can sit hidden in a wall for years — until it starts a fire or fries a $3,000 appliance. Every job we finish is one we'd be comfortable handing off to any inspector in the state.
By the numbers
- 20+Years of combined field experience on our crew
- 100%Licensed, insured & permit-pulled work
- 1Point of contact — no runaround
- 24 hrTypical response for estimate requests
Signs it's time to call
Don't wait for the sparks.
If any of these sound familiar, it's worth a conversation before it becomes an emergency:
- Breakers that trip repeatedly — even on lighter loads
- Outlets or switch plates that feel warm to the touch
- Flickering or dimming lights when large appliances kick on
- A burning or plastic smell near a panel, outlet or fixture
- Older two-prong outlets or knob-and-tube wiring still in service
- Extension cords running as permanent wiring
- A panel that hasn't been touched since the house was built
Materials & standards
Quality parts. Nothing swapped behind your back.
We stock and install trusted, contractor-grade brands — the same gear your local inspector expects to see in the panel. If a product is on backorder or we're recommending an upgrade, we tell you before it goes in.
What to expect
From first call to final walkthrough.
Here's exactly how a typical new construction wiring project moves — no surprises, no vague timelines.
Call or request online
Tell us what's going on. We'll ask a few sizing questions and book a site visit or estimate.
Site visit & written quote
We come out, look at the actual conditions, and put a real number on paper — not a guess.
Scheduled install
Materials pre-staged, permits pulled, arrival window confirmed the day before.
Test, label & walkthrough
We test every circuit, label the panel, walk you through the work and clean up before we leave.
Safety & code
Built to current NEC — and the way we'd wire our own house.
Every new construction wiring job follows the current National Electrical Code plus any Pennsylvania and local amendments. That means correct grounding and bonding, arc-fault and ground-fault protection where required, properly sized conductors, torqued lugs, and clean, labeled panelwork you can actually work on later.
- AFCI/GFCI protection where code requires
- Properly torqued lugs and terminations
- Labeled circuits & updated panel schedule
- Correct grounding & bonding path
- Permits and inspection when required
- Copper conductors sized to real load
"They quoted what they charged. Nothing extra tacked on at the end. The panel looks better than the day it was installed."
"Called Tuesday, generator running by Friday. Cleanest install I've seen — and I've had two others quoted."
"Our shop needed rewiring in phases so we could stay open. They worked around us and every deadline hit."
Why Clear Electric
A new construction wiring job done the right way the first time.
Licensed & insured
Pennsylvania electrical contractor, fully insured for residential and commercial work.
Code-compliant
Every install meets current NEC and local Pennsylvania amendments — inspection-ready.
Clean workmanship
Labeled circuits, dressed wire, tidy job sites. Work you'd be happy to show off.
Clear timelines
We show up when we say we will, and we walk you through everything before we leave.
What you get
No mystery charges, no loose ends.
Every new construction wiring project from Clear Electric includes the same baseline of communication, paperwork and quality — whether it's a single circuit or a full installation.
- Written, itemized estimate before any work begins
- Permits pulled and inspections coordinated when required
- Materials and brands disclosed up front — no swaps without your okay
- Labeled panel directory and circuit map updated on completion
- Photos of finished work and concealed runs for your records
- Owner walkthrough and answers to every question before we leave
Where we work
New Construction Wiring across the Susquehanna Valley
Local crews, local response times. Click your town for area-specific details.
Get started
Talk to a real electrician about your new construction wiring project.
We'll ask the right questions, give you honest options, and put it all in writing. No pressure, no upsells.
- Free estimates across the valley
- Same- or next-business-day response
- Fully licensed & insured in PA
- Generac-certified for standby power
Ready to power your project?
Free estimates across the Susquehanna Valley. Licensed and insured.