Service
EV Charging Station Installation
Level 2 home and commercial EV charger installs — properly sized to your panel, code-compliant and clean.
What this service includes
- Level 2 home EV charger installation (40A / 48A)
- Tesla Wall Connector, ChargePoint, Wallbox, Grizzl-E and others
- Hardwired or NEMA 14-50 outlet installs
- Panel load calculations and sub-panel work if needed
- Indoor garage and outdoor weather-rated installs
- Conduit runs across garages, basements and driveways
- Commercial / workplace charging stations
- Permits, inspection and utility coordination
Who it's for
- New EV owners installing their first home charger
- Two-EV households needing a load-managed setup
- Businesses adding workplace or customer charging
- Property managers wiring multi-unit parking
Why it matters
An undersized or sloppy EV install trips breakers, overheats wire, and in worst cases starts fires. We size the circuit to the charger AND your real panel load, use the right wire and breaker, and label everything clearly.
How it works
- 1. Quick site visit — panel check, route for the run, charger location.
- 2. Written quote with charger options if you haven't picked one yet.
- 3. Install, energize, test with your vehicle, and walk you through the app.
Hardwired vs plug-in (NEMA 14-50)
Plug-in chargers on a 14-50 outlet are simpler and let you take the charger with you. Hardwired installs allow higher continuous current (48A on a 60A circuit), cleaner mounting, and are generally more reliable long-term. We'll recommend the right approach for your charger, panel and how you'll actually use it.
What if my panel is full or undersized?
Common situation. Options include a load-management module that pauses charging when other large loads run, a sub-panel for the garage, or a service upgrade from 100A to 200A. We'll lay out the trade-offs in plain English with real prices.
Common questions
Which EV chargers do you install?
All of the major Level 2 chargers — Tesla Wall Connector, ChargePoint Home Flex, Wallbox Pulsar, Grizzl-E, Emporia, JuiceBox and more. If you've already bought one, we'll install it. If not, we'll recommend based on your car and usage.
Do I need a permit for an EV charger?
Yes, an electrical permit is required for a hardwired Level 2 charger in PA. We pull the permit and handle the inspection.
Can you install commercial / workplace chargers?
Yes — single or multi-port commercial chargers, with conduit runs across parking lots and switchgear coordination as needed.
Available across the Susquehanna Valley
We offer this service throughout our full service area, including Watsontown, PA, Lewisburg, PA, Milton, PA, Danville, PA, Selinsgrove, PA, Williamsport, PA, Allenwood, PA, Sunbury, PA, Bloomsburg, PA.
The Clear Electric approach
More than a quote — a plan you can actually follow.
Most homeowners and business owners we meet have been burned before — a vague verbal price, a crew that disappears mid-job, or a "finished" install that fails inspection. Our ev charging station installation process is built to be the opposite of that: everything in writing, every step explained, and a single electrician you can call from the first phone conversation through the final walkthrough.
Because we're a local Susquehanna Valley company, we're not routing you through a call center or subbing your job out to whoever is cheapest that week. The person who quotes your ev charging station installation project is on site, accountable for the work, and lives in the same community. If something needs a follow-up in six months, we pick up the phone.
We take ev charging station installation work seriously because electrical is one of the few trades where doing it "mostly right" isn't good enough. Loose neutrals, undersized conductors, missing bonding, or an ungrounded circuit can sit hidden in a wall for years — until it starts a fire or fries a $3,000 appliance. Every job we finish is one we'd be comfortable handing off to any inspector in the state.
By the numbers
- 20+Years of combined field experience on our crew
- 100%Licensed, insured & permit-pulled work
- 1Point of contact — no runaround
- 24 hrTypical response for estimate requests
Signs it's time to call
Don't wait for the sparks.
If any of these sound familiar, it's worth a conversation before it becomes an emergency:
- Breakers that trip repeatedly — even on lighter loads
- Outlets or switch plates that feel warm to the touch
- Flickering or dimming lights when large appliances kick on
- A burning or plastic smell near a panel, outlet or fixture
- Older two-prong outlets or knob-and-tube wiring still in service
- Extension cords running as permanent wiring
- A panel that hasn't been touched since the house was built
Materials & standards
Quality parts. Nothing swapped behind your back.
We stock and install trusted, contractor-grade brands — the same gear your local inspector expects to see in the panel. If a product is on backorder or we're recommending an upgrade, we tell you before it goes in.
What to expect
From first call to final walkthrough.
Here's exactly how a typical ev charging station installation project moves — no surprises, no vague timelines.
Call or request online
Tell us what's going on. We'll ask a few sizing questions and book a site visit or estimate.
Site visit & written quote
We come out, look at the actual conditions, and put a real number on paper — not a guess.
Scheduled install
Materials pre-staged, permits pulled, arrival window confirmed the day before.
Test, label & walkthrough
We test every circuit, label the panel, walk you through the work and clean up before we leave.
Safety & code
Built to current NEC — and the way we'd wire our own house.
Every ev charging station installation job follows the current National Electrical Code plus any Pennsylvania and local amendments. That means correct grounding and bonding, arc-fault and ground-fault protection where required, properly sized conductors, torqued lugs, and clean, labeled panelwork you can actually work on later.
- AFCI/GFCI protection where code requires
- Properly torqued lugs and terminations
- Labeled circuits & updated panel schedule
- Correct grounding & bonding path
- Permits and inspection when required
- Copper conductors sized to real load
"They quoted what they charged. Nothing extra tacked on at the end. The panel looks better than the day it was installed."
"Called Tuesday, generator running by Friday. Cleanest install I've seen — and I've had two others quoted."
"Our shop needed rewiring in phases so we could stay open. They worked around us and every deadline hit."
Why Clear Electric
A ev charging station installation job done the right way the first time.
Licensed & insured
Pennsylvania electrical contractor, fully insured for residential and commercial work.
Code-compliant
Every install meets current NEC and local Pennsylvania amendments — inspection-ready.
Clean workmanship
Labeled circuits, dressed wire, tidy job sites. Work you'd be happy to show off.
Clear timelines
We show up when we say we will, and we walk you through everything before we leave.
What you get
No mystery charges, no loose ends.
Every ev charging station installation project from Clear Electric includes the same baseline of communication, paperwork and quality — whether it's a single circuit or a full installation.
- Written, itemized estimate before any work begins
- Permits pulled and inspections coordinated when required
- Materials and brands disclosed up front — no swaps without your okay
- Labeled panel directory and circuit map updated on completion
- Photos of finished work and concealed runs for your records
- Owner walkthrough and answers to every question before we leave
Where we work
EV Charging Station Installation across the Susquehanna Valley
Local crews, local response times. Click your town for area-specific details.
Get started
Talk to a real electrician about your ev charging station installation project.
We'll ask the right questions, give you honest options, and put it all in writing. No pressure, no upsells.
- Free estimates across the valley
- Same- or next-business-day response
- Fully licensed & insured in PA
- Generac-certified for standby power
Ready to power your project?
Free estimates across the Susquehanna Valley. Licensed and insured.